what should be included in abstract dissertation

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on February 28, 2019 by Shona McCombes . Revised on July 18, 2023 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a thesis ,  dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, other interesting articles, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the US during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book or research proposal
• Applying for research grants

It’s easiest to write your abstract last, right before the proofreading stage, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your dissertation topic , but don’t go into detailed background information. If your abstract uses specialized terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyze,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Don't submit your assignments before you do this

The academic proofreading tool has been trained on 1000s of academic texts. Making it the most accurate and reliable proofreading tool for students. Free citation check included.

Try for free

Next, summarize the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalizability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarize the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services or use the paraphrasing tool .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Anchoring bias
• Halo effect
• The Baader–Meinhof phenomenon
• The placebo effect
• Nonresponse bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarizes the contents of your paper.

An abstract for a thesis or dissertation is usually around 200–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis , dissertation or research paper .

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page in the thesis or dissertation , after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

McCombes, S. (2023, July 18). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved June 24, 2024, from https://www.scribbr.com/dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, shorten your abstract or summary, how to write a literature review | guide, examples, & templates, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

The Dissertation Abstract: 101

How to write a clear & concise abstract (with examples).

By:   Madeline Fink (MSc) Reviewed By: Derek Jansen (MBA)   | June 2020

So, you’ve (finally) finished your thesis or dissertation or thesis. Now it’s time to write up your abstract (sometimes also called the executive summary). If you’re here, chances are you’re not quite sure what you need to cover in this section, or how to go about writing it. Fear not – we’ll explain it all in plain language , step by step , with clear examples .

Overview: The Dissertation/Thesis Abstract

• What exactly is a dissertation (or thesis) abstract
• What’s the purpose and function of the abstract
• Why is the abstract so important
• How to write a high-quality dissertation abstract
• Example/sample of a quality abstract
• Quick tips to write a high-quality dissertation abstract

What is an abstract?

Simply put, the abstract in a dissertation or thesis is a short (but well structured) summary that outlines the most important points of your research (i.e. the key takeaways). The abstract is usually 1 paragraph or about 300-500 words long (about one page), but but this can vary between universities.

A quick note regarding terminology – strictly speaking, an abstract and an executive summary are two different things when it comes to academic publications. Typically, an abstract only states what the research will be about, but doesn’t explore the findings – whereas an executive summary covers both . However, in the context of a dissertation or thesis, the abstract usually covers both, providing a summary of the full project.

In terms of content, a good dissertation abstract usually covers the following points:

• The purpose of the research (what’s it about and why’s that important)
• The methodology (how you carried out the research)
• The key research findings (what answers you found)
• The implications of these findings (what these answers mean)

We’ll explain each of these in more detail a little later in this post. Buckle up.

What’s the purpose of the abstract?

A dissertation abstract has two main functions:

The first purpose is to  inform potential readers  of the main idea of your research without them having to read your entire piece of work. Specifically, it needs to communicate what your research is about (what were you trying to find out) and what your findings were . When readers are deciding whether to read your dissertation or thesis, the abstract is the first part they’ll consider. 

The second purpose of the abstract is to  inform search engines and dissertation databases  as they index your dissertation or thesis. The keywords and phrases in your abstract (as well as your keyword list) will often be used by these search engines to categorize your work and make it accessible to users. 

Simply put, your abstract is your shopfront display window – it’s what passers-by (both human and digital) will look at before deciding to step inside. 

Why’s it so important?

The short answer – because most people don’t have time to read your full dissertation or thesis! Time is money, after all…

If you think back to when you undertook your literature review , you’ll quickly realise just how important abstracts are! Researchers reviewing the literature on any given topic face a mountain of reading, so they need to optimise their approach. A good dissertation abstract gives the reader a “TLDR” version of your work – it helps them decide whether to continue to read it in its entirety. So, your abstract, as your shopfront display window, needs to “sell” your research to time-poor readers.

You might be thinking, “but I don’t plan to publish my dissertation”. Even so, you still need to provide an impactful abstract for your markers. Your ability to concisely summarise your work is one of the things they’re assessing, so it’s vital to invest time and effort into crafting an enticing shop window.  

A good abstract also has an added purpose for grad students . As a freshly minted graduate, your dissertation or thesis is often your most significant professional accomplishment and highlights where your unique expertise lies. Potential employers who want to know about this expertise are likely to only read the abstract (as opposed to reading your entire document) – so it needs to be good!

Think about it this way – if your thesis or dissertation were a book, then the abstract would be the blurb on the back cover. For better or worse, readers will absolutely judge your book by its cover .

How to write your abstract

As we touched on earlier, your abstract should cover four important aspects of your research: the purpose , methodology , findings , and implications . Therefore, the structure of your dissertation or thesis abstract needs to reflect these four essentials, in the same order.  Let’s take a closer look at each of them, step by step:

Step 1: Describe the purpose and value of your research

Here you need to concisely explain the purpose and value of your research. In other words, you need to explain what your research set out to discover and why that’s important. When stating the purpose of research, you need to clearly discuss the following:

• What were your research aims and research questions ?
• Why were these aims and questions important?

It’s essential to make this section extremely clear, concise and convincing . As the opening section, this is where you’ll “hook” your reader (marker) in and get them interested in your project. If you don’t put in the effort here, you’ll likely lose their interest.

Step 2: Briefly outline your study’s methodology

In this part of your abstract, you need to very briefly explain how you went about answering your research questions . In other words, what research design and methodology you adopted in your research. Some important questions to address here include:

• Did you take a qualitative or quantitative approach ?
• Who/what did your sample consist of?
• How did you collect your data?
• How did you analyse your data?

Simply put, this section needs to address the “ how ” of your research. It doesn’t need to be lengthy (this is just a summary, after all), but it should clearly address the four questions above.

Need a helping hand?

Step 3: Present your key findings

Next, you need to briefly highlight the key findings . Your research likely produced a wealth of data and findings, so there may be a temptation to ramble here. However, this section is just about the key findings – in other words, the answers to the original questions that you set out to address.

Again, brevity and clarity are important here. You need to concisely present the most important findings for your reader.

Step 4: Describe the implications of your research

Have you ever found yourself reading through a large report, struggling to figure out what all the findings mean in terms of the bigger picture? Well, that’s the purpose of the implications section – to highlight the “so what?” of your research. 

In this part of your abstract, you should address the following questions:

• What is the impact of your research findings on the industry /field investigated? In other words, what’s the impact on the “real world”. 
• What is the impact of your findings on the existing body of knowledge ? For example, do they support the existing research?
• What might your findings mean for future research conducted on your topic?

If you include these four essential ingredients in your dissertation abstract, you’ll be on headed in a good direction.

Example: Dissertation/thesis abstract

Here is an example of an abstract from a master’s thesis, with the purpose , methods , findings , and implications colour coded.

The U.S. citizenship application process is a legal and symbolic journey shaped by many cultural processes. This research project aims to bring to light the experiences of immigrants and citizenship applicants living in Dallas, Texas, to promote a better understanding of Dallas’ increasingly diverse population. Additionally, the purpose of this project is to provide insights to a specific client, the office of Dallas Welcoming Communities and Immigrant Affairs, about Dallas’ lawful permanent residents who are eligible for citizenship and their reasons for pursuing citizenship status . The data for this project was collected through observation at various citizenship workshops and community events, as well as through semi-structured interviews with 14 U.S. citizenship applicants . Reasons for applying for U.S. citizenship discussed in this project include a desire for membership in U.S. society, access to better educational and economic opportunities, improved ease of travel and the desire to vote. Barriers to the citizenship process discussed in this project include the amount of time one must dedicate to the application, lack of clear knowledge about the process and the financial cost of the application. Other themes include the effects of capital on applicant’s experience with the citizenship process, symbolic meanings of citizenship, transnationalism and ideas of deserving and undeserving surrounding the issues of residency and U.S. citizenship. These findings indicate the need for educational resources and mentorship for Dallas-area residents applying for U.S. citizenship, as well as a need for local government programs that foster a sense of community among citizenship applicants and their neighbours.

Practical tips for writing your abstract

When crafting the abstract for your dissertation or thesis, the most powerful technique you can use is to try and put yourself in the shoes of a potential reader. Assume the reader is not an expert in the field, but is interested in the research area. In other words, write for the intelligent layman, not for the seasoned topic expert. 

Start by trying to answer the question “why should I read this dissertation?”

Remember the WWHS.

Make sure you include the  what , why ,  how , and  so what  of your research in your abstract:

• What you studied (who and where are included in this part)
• Why the topic was important
• How you designed your study (i.e. your research methodology)
• So what were the big findings and implications of your research

Keep it simple.

Use terminology appropriate to your field of study, but don’t overload your abstract with big words and jargon that cloud the meaning and make your writing difficult to digest. A good abstract should appeal to all levels of potential readers and should be a (relatively) easy read. Remember, you need to write for the intelligent layman.

Be specific.

When writing your abstract, clearly outline your most important findings and insights and don’t worry about “giving away” too much about your research – there’s no need to withhold information. This is the one way your abstract is not like a blurb on the back of a book – the reader should be able to clearly understand the key takeaways of your thesis or dissertation after reading the abstract. Of course, if they then want more detail, they need to step into the restaurant and try out the menu.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

19 Comments

This was so very useful, thank you Caroline.

Much appreciated.

This information on Abstract for writing a Dissertation was very helpful to me!

This was so useful. Thank you very much.

This was really useful in writing the abstract for my dissertation. Thank you Caroline.

Very clear and helpful information. Thanks so much!

Fabulous information – succinct, simple information which made my life easier after the most stressful and rewarding 21 months of completing this Masters Degree.

Very clear, specific and to the point guidance. Thanks a lot. Keep helping people 🙂

This was very helpful

Thanks for this nice and helping document.

Nicely explained. Very simple to understand. Thank you!

Waw!!, this is a master piece to say the least.

Very helpful and enjoyable

Thank you for sharing the very important and usful information. Best Bahar

Very clear and more understandable way of writing. I am so interested in it. God bless you dearly!!!!

Really, I found the explanation given of great help. The way the information is presented is easy to follow and capture.

Wow! Thank you so much for opening my eyes. This was so helpful to me.

Thanks for this! Very concise and helpful for my ADHD brain.

I am so grateful for the tips. I am very optimistic in coming up with a winning abstract for my dessertation, thanks to you.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

• Features for Creative Writers
• Features for Work
• Features for Higher Education
• Features for Teachers
• Features for Non-Native Speakers
• Learn Blog Grammar Guide Community Events FAQ
• Grammar Guide

How to Write an Abstract (With Examples)

Sarah Oakley

Table of Contents

What is an abstract in a paper, how long should an abstract be, 5 steps for writing an abstract, examples of an abstract, how prowritingaid can help you write an abstract.

If you are writing a scientific research paper or a book proposal, you need to know how to write an abstract, which summarizes the contents of the paper or book.

When researchers are looking for peer-reviewed papers to use in their studies, the first place they will check is the abstract to see if it applies to their work. Therefore, your abstract is one of the most important parts of your entire paper.

In this article, we’ll explain what an abstract is, what it should include, and how to write one.

An abstract is a concise summary of the details within a report. Some abstracts give more details than others, but the main things you’ll be talking about are why you conducted the research, what you did, and what the results show.

When a reader is deciding whether to read your paper completely, they will first look at the abstract. You need to be concise in your abstract and give the reader the most important information so they can determine if they want to read the whole paper.

Remember that an abstract is the last thing you’ll want to write for the research paper because it directly references parts of the report. If you haven’t written the report, you won’t know what to include in your abstract.

If you are writing a paper for a journal or an assignment, the publication or academic institution might have specific formatting rules for how long your abstract should be. However, if they don’t, most abstracts are between 150 and 300 words long.

A short word count means your writing has to be precise and without filler words or phrases. Once you’ve written a first draft, you can always use an editing tool, such as ProWritingAid, to identify areas where you can reduce words and increase readability.

If your abstract is over the word limit, and you’ve edited it but still can’t figure out how to reduce it further, your abstract might include some things that aren’t needed. Here’s a list of three elements you can remove from your abstract:

Discussion : You don’t need to go into detail about the findings of your research because your reader will find your discussion within the paper.

Definition of terms : Your readers are interested the field you are writing about, so they are likely to understand the terms you are using. If not, they can always look them up. Your readers do not expect you to give a definition of terms in your abstract.

References and citations : You can mention there have been studies that support or have inspired your research, but you do not need to give details as the reader will find them in your bibliography.

Good writing = better grades

ProWritingAid will help you improve the style, strength, and clarity of all your assignments.

If you’ve never written an abstract before, and you’re wondering how to write an abstract, we’ve got some steps for you to follow. It’s best to start with planning your abstract, so we’ve outlined the details you need to include in your plan before you write.

Remember to consider your audience when you’re planning and writing your abstract. They are likely to skim read your abstract, so you want to be sure your abstract delivers all the information they’re expecting to see at key points.

1. What Should an Abstract Include?

Abstracts have a lot of information to cover in a short number of words, so it’s important to know what to include. There are three elements that need to be present in your abstract:

Your context is the background for where your research sits within your field of study. You should briefly mention any previous scientific papers or experiments that have led to your hypothesis and how research develops in those studies.

Your hypothesis is your prediction of what your study will show. As you are writing your abstract after you have conducted your research, you should still include your hypothesis in your abstract because it shows the motivation for your paper.

Throughout your abstract, you also need to include keywords and phrases that will help researchers to find your article in the databases they’re searching. Make sure the keywords are specific to your field of study and the subject you’re reporting on, otherwise your article might not reach the relevant audience.

2. Can You Use First Person in an Abstract?

You might think that first person is too informal for a research paper, but it’s not. Historically, writers of academic reports avoided writing in first person to uphold the formality standards of the time. However, first person is more accepted in research papers in modern times.

If you’re still unsure whether to write in first person for your abstract, refer to any style guide rules imposed by the journal you’re writing for or your teachers if you are writing an assignment.

3. Abstract Structure

Some scientific journals have strict rules on how to structure an abstract, so it’s best to check those first. If you don’t have any style rules to follow, try using the IMRaD structure, which stands for Introduction, Methodology, Results, and Discussion.

Following the IMRaD structure, start with an introduction. The amount of background information you should include depends on your specific research area. Adding a broad overview gives you less room to include other details. Remember to include your hypothesis in this section.

The next part of your abstract should cover your methodology. Try to include the following details if they apply to your study:

What type of research was conducted?

How were the test subjects sampled?

What were the sample sizes?

What was done to each group?

How long was the experiment?

How was data recorded and interpreted?

Following the methodology, include a sentence or two about the results, which is where your reader will determine if your research supports or contradicts their own investigations.

The results are also where most people will want to find out what your outcomes were, even if they are just mildly interested in your research area. You should be specific about all the details but as concise as possible.

The last few sentences are your conclusion. It needs to explain how your findings affect the context and whether your hypothesis was correct. Include the primary take-home message, additional findings of importance, and perspective. Also explain whether there is scope for further research into the subject of your report.

Your conclusion should be honest and give the reader the ultimate message that your research shows. Readers trust the conclusion, so make sure you’re not fabricating the results of your research. Some readers won’t read your entire paper, but this section will tell them if it’s worth them referencing it in their own study.

4. How to Start an Abstract

The first line of your abstract should give your reader the context of your report by providing background information. You can use this sentence to imply the motivation for your research.

You don’t need to use a hook phrase or device in your first sentence to grab the reader’s attention. Your reader will look to establish relevance quickly, so readability and clarity are more important than trying to persuade the reader to read on.

5. How to Format an Abstract

Most abstracts use the same formatting rules, which help the reader identify the abstract so they know where to look for it.

Here’s a list of formatting guidelines for writing an abstract:

Stick to one paragraph

Use block formatting with no indentation at the beginning

Put your abstract straight after the title and acknowledgements pages

Use present or past tense, not future tense

There are two primary types of abstract you could write for your paper—descriptive and informative.

An informative abstract is the most common, and they follow the structure mentioned previously. They are longer than descriptive abstracts because they cover more details.

Descriptive abstracts differ from informative abstracts, as they don’t include as much discussion or detail. The word count for a descriptive abstract is between 50 and 150 words.

Here is an example of an informative abstract:

A growing trend exists for authors to employ a more informal writing style that uses “we” in academic writing to acknowledge one’s stance and engagement. However, few studies have compared the ways in which the first-person pronoun “we” is used in the abstracts and conclusions of empirical papers. To address this lacuna in the literature, this study conducted a systematic corpus analysis of the use of “we” in the abstracts and conclusions of 400 articles collected from eight leading electrical and electronic (EE) engineering journals. The abstracts and conclusions were extracted to form two subcorpora, and an integrated framework was applied to analyze and seek to explain how we-clusters and we-collocations were employed. Results revealed whether authors’ use of first-person pronouns partially depends on a journal policy. The trend of using “we” showed that a yearly increase occurred in the frequency of “we” in EE journal papers, as well as the existence of three “we-use” types in the article conclusions and abstracts: exclusive, inclusive, and ambiguous. Other possible “we-use” alternatives such as “I” and other personal pronouns were used very rarely—if at all—in either section. These findings also suggest that the present tense was used more in article abstracts, but the present perfect tense was the most preferred tense in article conclusions. Both research and pedagogical implications are proffered and critically discussed.

Wang, S., Tseng, W.-T., & Johanson, R. (2021). To We or Not to We: Corpus-Based Research on First-Person Pronoun Use in Abstracts and Conclusions. SAGE Open, 11(2).

Here is an example of a descriptive abstract:

From the 1850s to the present, considerable criminological attention has focused on the development of theoretically-significant systems for classifying crime. This article reviews and attempts to evaluate a number of these efforts, and we conclude that further work on this basic task is needed. The latter part of the article explicates a conceptual foundation for a crime pattern classification system, and offers a preliminary taxonomy of crime.

Farr, K. A., & Gibbons, D. C. (1990). Observations on the Development of Crime Categories. International Journal of Offender Therapy and Comparative Criminology, 34(3), 223–237.

If you want to ensure your abstract is grammatically correct and easy to read, you can use ProWritingAid to edit it. The software integrates with Microsoft Word, Google Docs, and most web browsers, so you can make the most of it wherever you’re writing your paper.

Before you edit with ProWritingAid, make sure the suggestions you are seeing are relevant for your document by changing the document type to “Abstract” within the Academic writing style section.

You can use the Readability report to check your abstract for places to improve the clarity of your writing. Some suggestions might show you where to remove words, which is great if you’re over your word count.

We hope the five steps and examples we’ve provided help you write a great abstract for your research paper.

Get started with ProWritingAid

Drop us a line or let's stay in touch via :

• How to Write an Abstract for a Dissertation

Written by Hannah Slack

Every PhD student will have to write an abstract. Whether it’s for a conference paper , journal article or your thesis , the abstract is an important part for many academic activities. Although only a single short paragraph, writing one effectively takes practice.

This page will take you through what a dissertation abstract is, why it’s so important and how to write one.

What is an academic abstract?

An academic abstract is a short and concise summary of research . It should cover the aim or research question of your work, your methodology, results and the wider implications of your conclusions. All this needs to be covered in around 200-300 words .

One of the common mistakes people make when writing abstracts is not understanding their purpose. An abstract is not for the author, it’s for the reader . To summarise your research, as the person who knows it best, may seem easy. But to be able to communicate the complexities and importance of your work to someone else, likely outside of your field, can be difficult.

When will I need to write an academic abstract?

There are many different places that you’ll find abstracts. Some of the most common ones include:

• Grant and funding applications
• Journal articles
• Conference applications
• Conference proceedings

This guide primarily focuses on the dissertation abstract, which is the most common form of this kind of text.

What’s the difference between an abstract and an introduction?

The main differences between a PhD dissertation abstract and an introduction are the purpose and the length. An abstract is a short, paragraph-sized summary of the whole thesis, covering context, your research and results. Whereas an introduction should be much longer and only cover the context of your work. An introduction is designed to explain the background of your work and so will take up at least an entire page.

Why are abstracts important?

Abstracts are important because they are a quick and easy way to communicate your work. In many ways, academic abstracts are a promotional tool and so should be considered carefully.

For your thesis, it’s the first thing your examiners will read, forming their expectations for the rest of the dissertation.

In journal articles, their purpose is to convince the reader that they should read your article. If you’re applying for a conference, the abstract gives the organiser a taster of your paper so they can decide whether it’s suitable.

Effectively, your abstract is the first impression someone gets of your research and so it’s important to put your best foot forward.

How to write a PhD abstract

How you write a dissertation abstract will largely depend on what it’s for. For a PhD dissertation or journal article, you should have already written up the research which the abstract will summarise. You should focus on making sure your summary is an honest representation of the larger written work. However, for a conference application it’s likely you won’t yet have written the paper. In this instance, the abstract might focus more on the broader themes you intend to comment on and your methodology.

Whatever the intended purpose, all abstracts should broadly follow the same structure. To help you, we’ve put together a template to make sure you include all the important points.

PhD abstract format

Because a lot of information needs to be packed into a short paragraph, an abstract is easier to write when you break it down into the key elements. For a first draft, spend a few minutes on each of the six steps, only writing down one or two sentences.

• Rationale – Ask yourself why you are researching the topic and what is the context for your work. Here you should communicate the purpose of your study within the wider field.
• Research question – Now you should specify what the exact goal of this piece of research is. What question are you providing the answer for?
• Evidence and methods – After discussing the broader purpose of your work you now need to let the reader know what you have actually done. Try to summarise your methods and evidence with a few keywords to keep if brief. Some examples include qualitative, quantitative, archival or experimental.
• Results – Here, you should summarise your outcomes and highlight what is new or significant about your findings.
• Conclusion – The conclusion should relate back to your rationale and research question. Ask yourself, ‘what do the results mean?’
• Implications and applications – Lastly, the reader needs to know why your results are important to the field. You need to specify what is significant about this work and how it can be useful.

Once you have your framework it can be edited for a more natural flow. You may find that some points naturally merge into one sentence and others need some elaboration. But remember, the abstract must be short and concise so don’t be tempted to extend areas unnecessarily. Once you have a draft that you are happy with, consider asking for feedback from other PhD students or your supervisor.

Doing a PhD

For more information on trhe different stages of a doctorate, check out our guide to the PhD journey .

Ready to do a PhD?

Search our project listings to find out what you could be studying.

Want More Updates & Advice?

What happens during a typical PhD, and when? We've summarised the main milestones of a doctoral research journey.

The PhD thesis is the most important part of a doctoral degree. This page will introduce you to what you need to know about the PhD dissertation.

This page will give you an idea of what to expect from your routine as a PhD student, explaining how your daily life will look at you progress through a doctoral degree.

Our guide tells you everything about the application process for studying a PhD in the USA.

Is your supervisor moving universities? Or have you discovered another doctoral programme that better suits your goals? In this guide we take a look at how you can transfer a PhD to another university.

Ever wondered how hard is a PhD? Our guide can help you learn the level of a PhD compared to Masters study, what hurdles make a PhD hard, and why they occur.

FindAPhD. Copyright 2005-2024 All rights reserved.

Unknown    ( change )

Have you got time to answer some quick questions about PhD study?

Select your nearest city

You haven’t completed your profile yet. To get the most out of FindAPhD, finish your profile and receive these benefits:

• Monthly chance to win one of ten £10 Amazon vouchers ; winners will be notified every month.*
• The latest PhD projects delivered straight to your inbox
• Access to our £6,000 scholarship competition
• Weekly newsletter with funding opportunities, research proposal tips and much more
• Early access to our physical and virtual postgraduate study fairs

Or begin browsing FindAPhD.com

or begin browsing FindAPhD.com

*Offer only available for the duration of your active subscription, and subject to change. You MUST claim your prize within 72 hours, if not we will redraw.

Do you want hassle-free information and advice?

Create your FindAPhD account and sign up to our newsletter:

• Find out about funding opportunities and application tips
• Receive weekly advice, student stories and the latest PhD news
• Hear about our upcoming study fairs
• Save your favourite projects, track enquiries and get personalised subject updates

Create your account

Looking to list your PhD opportunities? Log in here .

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Prevent plagiarism, run a free check.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 24 June 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

• How it works

How to Write an Abstract for a Dissertation

Published by Owen Ingram at August 11th, 2021 , Revised On September 20, 2023

Dissertation Abstract – Definition

The abstract is regarded as the foremost component of a dissertation. It will be your first chance to set precise expectations for the supervisor, examiner or graduate committee members. An abstract for a dissertation is the first real significant narrative of your work and is placed at the beginning of the dissertation paper.

Presented in a shortened form, an abstract is a very brief overview of your research .

In this article, we will uncover every piece of information you need to know to write an abstract.  

According to the online archives of Simon Fraser University research database, “an abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there are insufficient time and space for the full text. ”

Do I Need to Write an Abstract?

You will be required to include an abstract at the beginning of your paper if you are working on your thesis, dissertation, research paper, or publishing a paper in any academic journal.

Even though the abstract appears right at the start of a dissertation paper, it is generally written at last. For it is only after you have compiled all the evidence and data, interpreted every piece of finding, backed your interpretation(s) with enough theoretical evidence and answered your research questions, that you can sum it all up in 150-200 words. The general length of an abstract.

 The table of contents is the section that immediately follows an abstract. Here is a guide on how to create a table of contents for the dissertation .

Your abstract should be an  entirely autonomous and independent text and never be an extract taken from within the paper’s original content. This also implies, indirectly, that it is unethical in research contexts to copy-paste chunks from within your own research in an abstract.

In particular, an abstract aims to provide an overview of research aim and objectives, methods of research employed, results obtained, findings, most salient interpretation(s), the conclusion and implication(s) of your research. Readers should be able to completely understand all aspects of your research work just by reading your abstract.

Also Read : How to Write Dissertation Discussion Chapter , How to Write a Remarkable Dissertation?

Stuck on a difficult dissertation? We can help!

Our Essay Writing Service Features:

• Expert UK Writers
• Plagiarism-free
• Timely Delivery
• Thorough Research
• Rigorous Quality Control

Now you can pay in up to 4 installments

How to Write a Dissertation Abstract

A dissertation abstract serves as a deal maker or breaker when it comes to making a strong impression on your readers. Your dissertation abstract can either motivate your readers to continue reading or discourage them from  moving on to the next chapters .

The abstract of a dissertation needs to be conspicuous, meaningful, interesting and of course, informative. It should contain brief but relevant information from all chapters of your dissertation to provide a brief overview of the research that has been conducted. This would mean its:

• What (topic statement of your research)
• Who (the sample)
• Why (the significance/objectives/aims/questions/hypothesis of your research)
• Where (the background/setting of your research)
• And how (the research design/tools/methods/methodologies etc. of your research)

 Here, we have put together some guidelines for students to understand how to write an abstract for a dissertation to make a great first impression on readers.

Key Components of a Dissertation Abstract

The  key elements of a dissertation abstract are as follows:

• Background statement/problem statement/thesis statement
• Information regarding research sample
• Methods of research employed
• A brief description of the results obtained and their interpretation (only the most important one(s))
• A summary of conclusion, limitations and future recommendations/implications (only the most salient ones)

1. Background/Problem Statement/Aims and Objectives

The first couple of sentences of your dissertation abstract should provide a summary of the purpose of your research. This can be expressed as follows:

• Background statement – Provide a brief perspective on the theoretical and practical significance of your work.
• The problem statement clearly communicates to the readers why there was a need to research the chosen topic.
• Present an overview of the research’s aim and objectives to establish what your research intended to achieve.
• Thesis statement – what is the main idea of your dissertation paper? What are your claims in reference to the established research questions?

Avoid writing this part of the abstract in future tense because it refers to concluded actions.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Also read: How to Get Dissertation Deadline Extension – Some Practical Methods.

This one-to-two lined section will give information about who the sample in your study was; where they are located/residing, etc. The reasons for selecting that group of participants, for instance, is not relevant for mention in an abstract.

3. Research Methods

Briefly specify your  dissertation research methodology immediately after stating the purpose and sample of your dissertation paper. Here, you will be expected to summarise how you straightforwardly conducted your research.

Like the first section, a description of research  methods should also be written in the simple past tense. There is absolutely  no need to highlight the limitations and/or validity  of your research methods here.

The goal is to take the readers through the overall approach and process quickly.

4. Research Findings

Provide a brief overview of the major  findings of your dissertation study . If you think you undiscovered multiple major findings, only mention the ones that directly answer a research question or two that was/were part of your study to begin with. For instance, if you studied the relation between two variables and your findings indicate it’s a positive correlation, you simply state that finding, not the other, minor ones related to this specific one.

This section is the crux of your abstract, so make sure you demonstrate how your research addressed the research objectives.

Furthermore, due to the word limit (150-200) of the abstract and the complexity of your research, you might not be able to include all results here. If that is the case, have only the most significant results.

This portion should be written in the past simple or present tense. Here is an example:

• Analysis of the responses has shown that there is a strong correlation between consumption and productivity.
• Analysis of the responses shows there is a strong correlation between coffee consumption and productivity.
• Analysis of the responses showed there was a strong correlation between coffee consumption and productivity.

5. Conclusion and Recommendation/Implication

Lastly, the  abstract of a dissertation  should  conclude your dissertation research . The conclusion should clearly report how your study addressed the research problem.

Use this part of the abstract to convince people how your research proved the argument or theory your research was built on and started off with.

Provide recommendations for practical implementation to clearly understand your audience how your work will solve the problem at hand.

Finally, do not forget to mention important research limitations briefly. For example, selecting a smaller sample size due to some constraints would be a limitation worth mentioning. This will add more weight and credibility to your research.

Make use of the present simple test when writing the conclusion.

Some institutions, however, dictate that you write one or two lines about the long- or short-term implications your research might have. This component would be the last one in an abstract, preceded by the conclusive statement.

Abstract keywords/phrases 

You might be asked to include important key terms and phrases at the end of the abstract, especially if your paper has been selected for publication in an academic journal.

These keywords help potential readers find your paper in search engines during their  desk-based research .

However, it should be noted that some academic journals have their own specific formatting requirements for keywords. It’s recommended that you read the requirements about keywords in their publication manuals to avoid any misunderstanding.

More on Abstract keywords

According to Hartley and Kostoff (2003), following are some different methods for supplying keywords for an abstract:

Researchers “supply them with no restrictions on the numbers allowed; supply up to a fixed number (e.g. six); supply key words as appropriate from a specified list; editors supplement/amend authors’ key words; editors supply key words; editors supply key words from a specified list; referees supply key words from a specified list; keywords are allocated according to the ‘house-rules’ applied to all journals; distributed by a specific publisher; keywords are determined by computer program at proof stage”.

Format of a Dissertation Abstract

The typical size of an abstract for a masters’ dissertation is 300-400 words whereas abstracts for undergraduate dissertation papers are 150-200 words in size.

Since their findings are generally more in number, abstracts for PhD-level dissertation papers are assigned 300-350 words. The dissertation abstract structure should be such that there are one or two sentences assigned to each chapter of the dissertation.

For example, if your dissertation paper has 5 chapters, there should be a minimum of 8-10 sentences in the abstract to provide a reflective summary of each chapter’s information.

As is the case  with the dissertation introduction chapter , you will be expected to specify the research questions clearly.

You might need to rearrange them and/or reduce the word count without missing out on any important element, considering there is room for only two to three research questions generally placed at the beginning of the abstract.

  Poor dissertation abstracts don’t present the findings of the research. It is important to recognize that the readers of your dissertation paper will be more interested in what findings you came up with as a result of your research and not merely what you did. Use at least 2 to 3 sentences for summarising the results and their interpretation.

Look for the formatting requirements in your dissertation handbook or writing guidelines provided by your school. Make sure to stay within the permissible word limit.  An abstract too long or too short will not serve the purpose.

Tips on How to Write the Abstract for Dissertation

Condensing your entire dissertation into just a few sentences can be a daunting task, especially if it’s your first time writing a dissertation abstract.

It is important to get your dissertation abstract right because this part of the dissertation paper is the first real piece of written description that your audience will read. You can even recall some of your own experiences where, due to shortage of time or many deadlines looming above your head, you had to skim and scam the abstract of a research article or journal paper you stumbled across. It probably gave you a good enough idea whether it was worth it to bookmark that paper to read fully later now, didn’t it?

That’s exactly the kind of effect your own abstract should have on its readers, too. It’s meant to give a holistic view of the entire research.

Here are some tips for you to make sure you write this part to the highest possible academic quality:

Also Read: Different Research Methods for Dissertation?

Tip #1: Avoid Citing Publications

Student researchers often get carried away with the research of professional researchers when writing an abstract. Avoid focusing on others’ work and demonstrate how your own research will substantially contribute to your area of study.

Depending on the allowable word limit for the abstract, you might be able to squeeze in a sentence or two about the scholarly background of the research problem you wish to address. Still, there is no need to cite any publications.

Tip #2: Be Concise and to-the-point

Your dissertation abstract should be attention-grabbing, even though you will have only a few hundred words to work with. So. it is crucial to communicate your research work in the most concise manner.  Never stuff your dissertation abstract with needless words and avoid vague verbiage that might put your readers off-track.

 Need help with writing a killer dissertation abstract? Our writers can write an abstract for a dissertation following your school’s guidelines. Or get help from our expert academics  with any part of your dissertation.

Tip # 3: Read Sample Abstracts

Learn the art of writing great dissertation abstract by reading abstract dissertation samples. It would make sense to look at how other people in your academic subject have written their abstracts.

If you have already conducted your  dissertation literature review , you might have already read many research paper abstracts – which you could use to get useful insights into how to format your dissertation abstract. Here is an abstract dissertation example to help you get started.

Tip #4: Coverage and Presentation

Remember, an abstract is one single paragraph. There are no breaks in it. It continues as a single body. Furthermore, it is written in a separate page. No other chapter or sub-headings etc. come before or after the abstract on the same page. There are also no headings – such as the topic of your research – above the title ‘Abstract’ on the abstract page. Simply give the heading of ‘Abstract’ and start it off from there. And last but not the least, another important thing to keep in mind is that abstract (pretty much like the rest of your thesis) will be double-spaced.

Tip #5: Language

Other researchers will look for key terms specific to your research field to figure out the purpose and nature of your dissertation paper. Make sure to include relevant terminology necessary for understanding your abstract and thereby determining what the research was about.

Tip #6: Shortening a Lengthy Abstract

It’s natural to sometimes get carried away while writing…even in academic writing. As Trochim and other writers state in their book, Research Methods: The Essential Knowledge Base , “In order to shorten your abstract, you should eliminate nonessential information wherever possible—this includes transitions phrases (e.g., ‘the results demonstrate . . .’).”

Can I use an excerpt from the paper as an abstract?

No, you should not. It is important for an abstract to be an entirely autonomous and independent text and never be an extract taken from within the paper’s original content. Write it in your own words, 

What is the purpose of an abstract?

The abstract of your dissertation provides a brief overview of the research conducted and the results obtained.

What should a dissertation abstract contain?

The abstract of your dissertation must give background information, mention the problem statement , research aims , and objectives, sample information, methods of research , the findings , conclusion and recommendations/implications.

Can I cite a reference in the abstract?

No, you must never cite any reference in the abstract.

You May Also Like

This article is a step-by-step guide to how to write statement of a problem in research. The research problem will be half-solved by defining it correctly.

A literature review is a survey of theses, articles, books and other academic sources. Here are guidelines on how to write dissertation literature review.

Dissertation Methodology is the crux of dissertation project. In this article, we will provide tips for you to write an amazing dissertation methodology.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

• HOW WE WORK
• THESIS WRITING
• DISSERTATION PROCESS

Steps Guide to Create Dissertation Abstract With Examples

Home >> Blog >> Steps Guide to Create Dissertation Abstract With Examples

An abstract summarizes your entire dissertation, typically ranging from 200-350 words. It should provide a clear overview of your project and highlight the main points of your argument. To write an effective abstract, you'll need to be concise and organized while still presenting your ideas clearly and coherently.

If you're a student working on a dissertation, you know that writing the abstract can be one of the most challenging parts. But don't worry, we're here to help!

In this blog post, we'll give you a step-by-step guide to creating your dissertation abstract and some examples to help you get started. So read on and start writing an abstract that will make your professors proud!

What is a Dissertation Abstract?

How to write a good dissertation abstract, dissertation abstract example, tips to write a strong dissertation abstract.

‘What is abstract in dissertation writing?’

The abstract is designed to quickly summarize your dissertation in an engaging way. It aims to show readers what they can expect from reading it more thoroughly later on. It is an important part of dissertation writing and must be written carefully.

The abstract is a short and concise way of getting your research paper's message across. It should summarize the entire work in one paragraph, so it can be easily understood by readers who are not familiar with what it is about!

It should be included before the table of contents and after the title page and acknowledgments.

‘What should dissertation abstract include?’

Ideally, a dissertation or thesis abstract should include the following things;

• The study's and research's goal.
• Your dissertation's research methods.
• The key findings and results.
• The implications of the obtained results.

A good abstract discusses all these points. It is written in the present simple tense.

What is the Main Purpose of an Abstract?

The first purpose of an abstract is to capture the attention of potential readers before they read the rest of your work. It should specifically communicate what you were attempting to discover and how this research was conducted so that anyone interested can decide whether or not they want more information on that topic.

The abstract provides brief background information and introduces your work to the readers. It helps readers in deciding whether or not to continue reading your work. It should be included in all research projects and case studies, just like a literature review.

Dissertation Abstract Structure

Here are the sections that must be included in a dissertation abstract format.

• Introduction
• Aims and objectives
• Results and discussion

Dissertation Abstract Length

It varies depending on which college/university you attend. Some universities require that you summarize your study in one paragraph, while others ask for about 300-500 words.

Dissertation abstract word count varies based on different colleges’ policies, so be sure to check yours before writing it.

(back to top)

Here are the easy steps to write a good dissertation abstract.

• 1. Explain the Research Purpose

Explain everything briefly and describe the significance of your research work. State the purpose and significance of your research and what the reader can learn from reading your paper.

The following are the components of an abstract:

• Your research objectives and questions.
• The significance of these research questions.

You must make this section extremely clear to capture your reader's attention and interest. This is where you'll "hook" them with a compelling introduction that will capture their attention in reading more about the project.

They might lose patience if we don't put in the effort from start to finish.

• 2. Describe Research Methodology

Describe how you responded to the research questions. This means that you will present the methodology and design of your research in this paragraph. It could be qualitative or quantitative in nature. Mention it whatever it is for your reader.

However, keep it brief and avoid providing all of the details here.

• 3. State Research’s Main Findings

This section contains the most important findings from your research. It should be concise and clear to readers about what you discovered, without padding it with unnecessary information or repeating things that have already been covered.

Remember to be concise and clear when summarizing the most important aspects of your study, namely answers to its original questions.

• 4. Discuss the Research Implications

Have you ever found yourself struggling to grasp the big picture while reading a lengthy paper? That is why we have implications. It explains what those numbers and findings mean in our daily lives as citizens and readers.

The following are the topics that should be discussed here.

• The significance of your research.
• The significance and impact of your research findings.
• Future research possibilities

Ensure that these elements are included in your abstract.

Here is a dissertation abstract sample PDF for your better understanding.

Thesis Introduction Chapter Sample

Here are the tips for writing a good and engaging abstract for your dissertation.

• Recognize the purpose of writing an abstract.
• Create an abstract after writing the entire dissertation.
• Explain each chapter in one to two lines before writing the abstract.
• Examine some abstract examples to gain a better understanding of them.
• Write clearly and avoid using overly complicated language.
• Concentrate on your personal research.
• Make an effort to keep everything concise and to the point.
• Keep the details for the main sections and don't include everything here.
• When you have finished writing your thesis abstract, it is time to read it and remove any errors thoroughly.

You can save time and effort by using these simple tips to write your dissertation abstract correctly. If you still require assistance, contact us at GradSchoolGenius for help! We are professionals who want nothing more than the best possible outcomes for students; they’ll be happy to assist with anything to get you a perfect paper.

Frequently Asked Questions

What is the difference between an abstract and an introduction.

An abstract is less than a page long, whereas an introduction is much longer. The introduction chapter is quite detailed, as it introduces the readers to each important and interesting detail. An abstract is unique in that it is used to capture the reader's interest.

How long should an abstract be for a 10000 word dissertation?

If you are writing a 10000-word dissertation, abstracts are typically about 300-350 words long. This is because it contains all the information necessary to understand what your paper is about.

What are the 5 parts of an abstract?

Here are 5 parts of an abstract:

• Research significance
• Methodology

Similar Blogs

• Dissertation Introduction
• Dissertation Topics
• Thesis Introduction
• Thesis Topics
• Thesis Format

GradSchoolGenius is a top-ranked academic writing service. We are home to high-quality academic thesis and dissertations for graduate and post-graduate students worldwide.

• 100% Plagiarism-free Work
• 100% Deadline Driven
• 100% Confidentiality
• 100% Money-back Guarantee
• 15+ Years of Experience
• 500+ Happy Clients
• 500+ Projects Completed
• 24/7 Customer Support

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 416 other subscribers.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

How to Write an Abstract for a Dissertation

At roughly 200 words, the abstract is the shortest part of the dissertation! Thankfully, it’s also one of the simplest to write – as long as you approach it sensibly…

The cardinal rule for writing an abstract is to leave it ‘til last. After all, the abstract is a summary of the entire dissertation, so it makes sense to leave it until the end.

Having said that, it’s a good idea to prepare yourself. If you learn how to write an abstract well ahead of time, there’ll be no last-minute panics. With that in mind, let’s run through the basics of writing a dissertation abstract.

What is the purpose of an abstract?

As mentioned, the abstract is essentially a summary of your dissertation. Think of it like a film synopsis or a book blurb. In roughly 200 words, it should tell the reader exactly what to expect from reading your dissertation.

A good abstract will also hint at the relevance and usefulness of the project. Indeed, in many ways, the abstract is an opportunity for you to ‘sell’ your project to the reader. The more compelling the abstract is, the more likely they are to read your dissertation.

What should an abstract include?

Later on, we’ll show you exactly how to structure an abstract. But first, it’s important to understand the elements of an abstract. In brief, an abstract should:

• Intrigue – In the first few sentences, you should introduce your topic to the reader, and highlight a key debate or issue that inspired the dissertation. If you can intrigue your reader in the opening sentence, they’re much more likely to continue reading!
• Convince – You’ll then need to convince your reader that your dissertation is necessary and worthwhile. Often, this is achieved by explaining how your dissertation extends or challenges the existing literature.
• Describe – You should describe the research methods very briefly but accurately.
• Inform – The abstract should be informative, particularly in relation to the findings of the study. It is not necessary to state all the findings, but you should highlight the key insights.
• Demonstrate relevance and usefulness – As mentioned, a good abstract finishes by saying who will find this research useful and why. Occasionally, it may also suggest directions for future research.

Remember, since the abstract is a summary of a project you’ve completed, it should be written in the present or past simple tense .

How should you structure an abstract?

The structure of an abstract can vary depending on the subject you are studying at university. Also, some universities have specific guidelines for writing an abstract, so always check with your tutor first. In particular, APA style has quite specific rules for formatting an abstract.

Though, generally speaking, the following structure is a good starting point for students in most subject areas:

1. Provide some background

The first 1-2 sentences should provide a very brief background to your topic of study. Remember, the aim is to intrigue here. These sentences are usually written in the present tense.

2. Refer to existing debates

Next, you should briefly explain the existing theory/research that has informed your chosen topic. If there are any key debates relevant to your topic, briefly mention them here. Try to limit this to 1-2 sentences and stick with the present or past tense.

3. Explain why the dissertation was worthwhile

In the next sentence or two, you’ll need to convince your reader that this study was worthwhile. Try to use the previous few sentences as a springboard, but explain why your study was unique.

4. State your research question

If it was not stated in the last section, the next sentence should clearly state your research question. You may have had more than one research question/research aim, but try to be as succinct as possible here.

5. State the methodology

In this sentence, you should clearly describe the methodology used . There is no need to explain why this method was chosen; just be as precise and succinct as possible.

6. State the key findings

The next sentence should explain the findings of your dissertation. Try not to be too technical here as your reader may be a novice. Also, there probably won’t be space to state all your findings, so present the ones that are most relevant and interesting. In fact, leaving a bit to the imagination is a good thing because it should intrigue the reader…

7. State who will find this research useful and why

In the last sentence, you should explain the usefulness and relevance of your dissertation. Consider: Who will benefit from this research? Does it have any practical applications?

8. List of keywords

Depending on your subject, you may be expected to provide a short list of keywords. This is common in Psychology research, for example. Check with your tutor if keywords are necessary. Remember, these should be listed in alphabetical order underneath the body of the abstract.

What’s the secret to writing a great abstract?

So, we’ve covered the basics of writing an abstract, but how can you write a first-class dissertation abstract? Well, we have two pieces of advice.

Firstly, be precise and succinct. Once you’ve written your abstract, you should set it aside for at least 24 hours, and then return to it with fresh eyes. As you read through it, cut out anything that’s not absolutely essential. Also, consider rewording sentences so that they are clear and readable. You can use our disseration writing services to help you with this.

Secondly, when you reveal your findings, try to find the right balance between revealing too much and revealing too little. It’s important to demonstrate that your study was interesting and relevant, but if you reveal too much, the reader may not want to bother reading your dissertation.

Indeed, writing a good dissertation is all about taking your reader on a journey and building momentum as you go. If you can manage this, you’ll keep your reader’s attention until the very last page! Creating this balance is not easy but it is a skill that can be developed through practice.

Common mistakes to avoid

So, we’ve reviewed the components of a good dissertation abstract. But what constitutes a bad abstract? Let’s finish by exploring some of the common mistakes students make when writing an abstract:

• Too long – Generally speaking, an abstract should be between 150 and 250 words, and it should fit on one page. If you make it too long, it won’t be compelling, and it’ll probably just confuse the reader.
• Lack of relevant keywords in the body of the abstract – Although an abstract should be written in reasonably non-technical language, it should include some relevant keywords. E.g. In the above example “Green marketing” and “Green purchasing behaviour” were pertinent keywords. Using appropriate keywords shows you’ve done wider reading and you understand where your project ‘fits in’ to the literature. Also, if your research were to be published, keywords would help other researchers to find it.
• Written in the wrong tense – A common mistake students make is that they write their abstract in the future tense (I.e. “This dissertation will explore the relationship between…”). The research has already been conducted, so it should be written in the past tense.
• Wrong positioning – The abstract should go after the title page and before the contents page.
• References and quotes – Generally speaking, an abstract should not contain references or quotations from other theorists. The only exception might be if your dissertation was solely focused on one particular theory/debate. In that case, keep quotes and references to an absolute minimum – your introduction and literature review will provide a comprehensive description of the theory!

You may also like

Writing the Dissertation - Guides for Success: The Abstract

• Writing the Dissertation Homepage
• Overview and Planning
• The Literature Review
• The Methodology
• The Results and Discussion
• The Conclusion
• The Abstract
• An abstract is a brief summary of an academic text.
• Researchers use abstracts to make an informed decision of whether an article, dissertation or other academic text is relevant or applicable to their own work.
• Conventions for the content and structure of abstracts vary by field, so general guidance should be adjusted to match best practices of published writers in your discipline.

What is an abstract?

An  abstract  is a concise summary of an academic text such as a journal article, dissertation or thesis. It provides a 'snapshot' view of the overall text, from the research question through to the conclusion.

In thinking about how to write an abstract, it's helpful to consider why we  read  abstracts. We usually encounter abstracts while searching databases for articles to reference in our own research. Before we commit to reading the full-text of an article, we want to gauge whether that article will make a relevant contribution to our work or thinking. The abstract helps us make that decision by providing a quick, 'boiled down' preview of the entire piece.

In that sense, an abstract of an academic text can be likened to the trailer for a movie. Just as a movie trailer informs your choice to see or skip a certain film, an abstract can inform your choice to read or skip an academic text. However, unlike a movie trailer, an abstract  should  contain 'spoilers' (i.e., the key conclusions of the writing).

Standard criteria for an abstract

• Word count  –   The average abstract is about 200 words, but you should adjust this figure to match the context in which you are writing. For example, if submitting an article to a journal, you should follow that journal's publishing guidelines. Similarly, your school/faculty may suggest a word count for dissertation abstracts.
• Able to stand alone  – A reader should understand the key elements of your research or argument from the abstract itself. In other words, the abstract should make sense as an independent piece of writing even to those who haven't read the report/research that follows.
• Audience aware  – Because the main audience for your abstract will be other researchers in your field, you can use discipline-specific jargon or language as needed. You only need to 'rein in' the specialist language if you are writing for the general public rather than fellow researchers.

As a rule of thumb, the abstract will mirror the structure of the piece of writing that it is summarising. However, it will compress the 'main beats' into a single paragraph (rarely will an abstract be formatted as more than one paragraph). Therefore, one common structure for an abstract is as follows:

• Context  – Relevant research background (think of this like a literature review condensed into one or two sentences).
• Objective statement/research question  – What your research aims to do and/or what it sets out to answer.
• Methodology  – How your research was carried out (cut the minute detail and stick to broad strokes).
• Results  – What your methodology produced.
• Discussion  – Interpretation of your results, often in relation to the wider discourse or prior research.
• Implications/future research  – If relevant, an indication of your research's impact and/or suggestions for future study.
• Conclusion  – The takeaway or answer to the question, 'So what?'

Our Writing Abstracts video provides examples and explanations of how abstracts vary between academic disciplines (e.g. humanities, sciences, social sciences, arts, etc.), so please check it out to explore expectations in your subject area.  Our  Writing Across Subjects guide  provides further guidance for some fields.

The writing process

• Don't be afraid to overwrite, first.  You can always cut back, cut back, and cut back some more, so when writing your first draft of the abstract, don't worry about the word count.
• Pare anything superfluous.  Edit ruthlessly once you have that first draft. Treat adverbs with suspicion ('strongly suggests' = 'suggests', 'carefully analysed' = 'analysed', and so on). Use a thesaurus or phrase dictionary to find one-word substitutes for multi-word phrases. Be prepared to go through many rounds of culling!
• Share it.  Get someone unfamiliar with your research to read your abstract and then explain your project back to you. If this exercise goes well, you are on the right track.
• What/why/who/how?  You can produce a starting place for your abstract by answering these questions: what did you do; why did you do it; who else is doing similar things; how did you do it? Imagine someone has asked the questions in a lift – therefore, you have to keep your answers brief (i.e., a literal 'elevator pitch' of your work).

Abstracts for dissertations and theses

The above guidance all applies when writing the abstract for your dissertation or thesis. Remember to keep your subject area in mind and tailor your abstract to the expectations of your discipline.

The university provides Word templates to help you format your entire submission, including a dedicated page for your abstract. Access the dissertation template here, or access the  thesis template here.

For help producing the other sections of a long academic work, check out our Writing the Dissertation: Guides for Success resources,   which include guides, video workshops, checklists and more.

• << Previous: The Conclusion
• Last Updated: May 30, 2024 2:45 PM
• URL: https://library.soton.ac.uk/writing_the_dissertation

How to Write a Dissertation Abstract | 12 Great Abstract Examples

Writing a dissertation is a monumental task that require dedication, perseverance, and meticulous attention to detail. As you navigate the world of academic research, one of the most crucial aspects of your dissertation will be learning how to write an abstract that quickly and easily communicates the essence of your study to readers.

In this article, we will explore the art of writing a dissertation abstract, a concise summary that encapsulates the essence and significance of your research.

What is an Abstract?

An abstract is a concise summary of a larger academic work, typically a research paper, thesis, or dissertation. It serves as a standalone representation of the main objectives, methods, results, and conclusions of the study, allowing readers to quickly understand what your dissertation is about without having to read the entire document.

Think of the abstract as a condensed version of your entire dissertation, distilled into a few paragraphs. It provides a snapshot of your research, highlighting the key points and findings in a clear way. While the abstract is usually located at the beginning of the document, it is often one of the last sections to be written, as it requires a thorough understanding of the entire study.

The primary purpose of an abstract is to inform and attract readers, providing them with enough information to determine whether the research is relevant to their interests and needs. In addition to summarizing the content of the research, the abstract also conveys the significance and potential impact of the study within its respective field or discipline. It should highlight the originality, relevance, and contribution of the research to existing knowledge, as well as its implications for future research, practice, or policy.

Overall, an abstract plays a crucial role in communicating the essence of your research to a wider audience. By writing a clear, concise, and compelling abstract, you can effectively engage readers, showcase the importance of your research, and increase the visibility and impact of your work within the academic community.

Read next: The Best Dissertation Proofreading Services

What Should a Dissertation Abstract Include?

You should ensure that your dissertation abstract contains the following sections:

• Title: The title of your dissertation should be prominently displayed at the beginning of the abstract. The title should accurately reflect the focus and scope of your research, providing readers with a clear understanding of the topic you have investigated.
• Objective: In this section, clearly state the main objective or research question addressed in your dissertation. This helps readers understand the specific purpose of your study and what you aimed to achieve through your research. Be concise yet informative in articulating the primary goal or purpose of your investigation.
• Methodology: Briefly describe the research methods and approach used to investigate the research question. Provide an overview of the research design, data collection methods, sampling techniques, and any other relevant procedures employed in your study. The methodology section should give readers insight into the empirical or theoretical framework guiding your research.
• Results: Summarize the key findings or outcomes of your study. Highlight the most significant results, trends, patterns, or conclusions that emerged from your analysis. Provide enough detail to convey the main findings of your research while remaining concise and focused. Avoid including extraneous details or raw data that are better suited for the main body of the dissertation.
• Conclusion: Provide a brief conclusion that synthesizes the significance of your research and its implications for the field. Reflect on how your findings contribute to existing knowledge, address gaps in the literature, or advance theoretical understanding within your discipline. Discuss the broader implications of your research and potential avenues for future research or application. End with a strong closing statement that emphasizes the importance of your work and leaves a lasting impression on the reader.

If you have invested enough legwork in choosing a good dissertation topic , justifying your research in this way should be relatively straightforward.

Why is The Abstract Section so Important?

Essentially, when people read your abstract, they will be asking themselves: Is this something I want to read? As such, the abstract serves the following important purposes:

• First Impression: The abstract serves as the initial point of contact between the reader and your dissertation. It is the first thing readers encounter when accessing your work, whether through academic databases, search engines, or publication indexes. As such, the abstract plays a crucial role in shaping readers’ perceptions of your research and influencing their decision to engage further with the full text.
• Accessibility and Discoverability: In today’s information-rich environment, researchers often rely on abstracts to quickly identify relevant literature and determine its suitability for their needs. By providing a concise summary of your research, the abstract enhances the accessibility and discoverability of your work, making it easier for scholars, practitioners, and other stakeholders to locate and access your dissertation amidst the vast sea of academic literature.
• Time-Efficient Communication: The abstract offers a time-efficient means of communication, allowing readers to glean essential insights from your research in a matter of minutes. In an era where time is a precious commodity, busy scholars and professionals often rely on abstracts to efficiently survey the landscape of research and identify studies of interest without having to invest extensive time and effort in reading the full text.
• Decision-Making Tool: For many readers, particularly journal editors, peer reviewers, and conference organizers, the abstract serves as a decision-making tool for evaluating the relevance, quality, and significance of your research. A well-crafted abstract can pique readers’ interest, demonstrate the novelty and importance of your findings, and persuade them to explore your dissertation further or consider it for publication or presentation.
• Representation of Your Work: The abstract serves as a condensed representation of your entire dissertation, encapsulating its core objectives, methods, results, and conclusions in a concise and coherent manner. As such, it plays a crucial role in shaping the overall narrative of your research and conveying its essence to a wider audience, including those who may not have the time or inclination to read the full text.
• Professional Recognition and Impact: A well-written abstract can enhance the visibility, impact, and recognition of your research within the academic community. It serves as a showcase of your scholarly abilities, showcasing your ability to articulate complex ideas, communicate effectively, and make a meaningful contribution to your field. A compelling abstract can attract attention, generate citations, and ultimately contribute to the dissemination and advancement of knowledge within your discipline.

When you have written your abstract, don’t forget to get is checked by a professional dissertation proofreader .

12 Examples of Dissertation Abstracts for a Range of Subjects

Leave a Comment

• Resources Home 🏠
• Try SciSpace Copilot
• Search research papers
• Add Copilot Extension
• Try AI Detector
• Try Paraphraser
• Try Citation Generator
• April Papers
• June Papers
• July Papers

Abstract Writing: A Step-by-Step Guide With Tips & Examples

Table of Contents

Introduction

Abstracts of research papers have always played an essential role in describing your research concisely and clearly to researchers and editors of journals, enticing them to continue reading. However, with the widespread availability of scientific databases, the need to write a convincing abstract is more crucial now than during the time of paper-bound manuscripts.

Abstracts serve to "sell" your research and can be compared with your "executive outline" of a resume or, rather, a formal summary of the critical aspects of your work. Also, it can be the "gist" of your study. Since most educational research is done online, it's a sign that you have a shorter time for impressing your readers, and have more competition from other abstracts that are available to be read.

The APCI (Academic Publishing and Conferences International) articulates 12 issues or points considered during the final approval process for conferences & journals and emphasises the importance of writing an abstract that checks all these boxes (12 points). Since it's the only opportunity you have to captivate your readers, you must invest time and effort in creating an abstract that accurately reflects the critical points of your research.

With that in mind, let’s head over to understand and discover the core concept and guidelines to create a substantial abstract. Also, learn how to organise the ideas or plots into an effective abstract that will be awe-inspiring to the readers you want to reach.

What is Abstract? Definition and Overview

The word "Abstract' is derived from Latin abstractus meaning "drawn off." This etymological meaning also applies to art movements as well as music, like abstract expressionism. In this context, it refers to the revealing of the artist's intention.

Based on this, you can determine the meaning of an abstract: A condensed research summary. It must be self-contained and independent of the body of the research. However, it should outline the subject, the strategies used to study the problem, and the methods implemented to attain the outcomes. The specific elements of the study differ based on the area of study; however, together, it must be a succinct summary of the entire research paper.

Abstracts are typically written at the end of the paper, even though it serves as a prologue. In general, the abstract must be in a position to:

• Describe the paper.
• Identify the problem or the issue at hand.
• Explain to the reader the research process, the results you came up with, and what conclusion you've reached using these results.
• Include keywords to guide your strategy and the content.

Furthermore, the abstract you submit should not reflect upon any of  the following elements:

• Examine, analyse or defend the paper or your opinion.
• What you want to study, achieve or discover.
• Be redundant or irrelevant.

After reading an abstract, your audience should understand the reason - what the research was about in the first place, what the study has revealed and how it can be utilised or can be used to benefit others. You can understand the importance of abstract by knowing the fact that the abstract is the most frequently read portion of any research paper. In simpler terms, it should contain all the main points of the research paper.

What is the Purpose of an Abstract?

Abstracts are typically an essential requirement for research papers; however, it's not an obligation to preserve traditional reasons without any purpose. Abstracts allow readers to scan the text to determine whether it is relevant to their research or studies. The abstract allows other researchers to decide if your research paper can provide them with some additional information. A good abstract paves the interest of the audience to pore through your entire paper to find the content or context they're searching for.

Abstract writing is essential for indexing, as well. The Digital Repository of academic papers makes use of abstracts to index the entire content of academic research papers. Like meta descriptions in the regular Google outcomes, abstracts must include keywords that help researchers locate what they seek.

Types of Abstract

Informative and Descriptive are two kinds of abstracts often used in scientific writing.

A descriptive abstract gives readers an outline of the author's main points in their study. The reader can determine if they want to stick to the research work, based on their interest in the topic. An abstract that is descriptive is similar to the contents table of books, however, the format of an abstract depicts complete sentences encapsulated in one paragraph. It is unfortunate that the abstract can't be used as a substitute for reading a piece of writing because it's just an overview, which omits readers from getting an entire view. Also, it cannot be a way to fill in the gaps the reader may have after reading this kind of abstract since it does not contain crucial information needed to evaluate the article.

To conclude, a descriptive abstract is:

• A simple summary of the task, just summarises the work, but some researchers think it is much more of an outline
• Typically, the length is approximately 100 words. It is too short when compared to an informative abstract.
• A brief explanation but doesn't provide the reader with the complete information they need;
• An overview that omits conclusions and results

An informative abstract is a comprehensive outline of the research. There are times when people rely on the abstract as an information source. And the reason is why it is crucial to provide entire data of particular research. A well-written, informative abstract could be a good substitute for the remainder of the paper on its own.

A well-written abstract typically follows a particular style. The author begins by providing the identifying information, backed by citations and other identifiers of the papers. Then, the major elements are summarised to make the reader aware of the study. It is followed by the methodology and all-important findings from the study. The conclusion then presents study results and ends the abstract with a comprehensive summary.

In a nutshell, an informative abstract:

• Has a length that can vary, based on the subject, but is not longer than 300 words.
• Contains all the content-like methods and intentions
• Offers evidence and possible recommendations.

Informative Abstracts are more frequent than descriptive abstracts because of their extensive content and linkage to the topic specifically. You should select different types of abstracts to papers based on their length: informative abstracts for extended and more complex abstracts and descriptive ones for simpler and shorter research papers.

What are the Characteristics of a Good Abstract?

• A good abstract clearly defines the goals and purposes of the study.
• It should clearly describe the research methodology with a primary focus on data gathering, processing, and subsequent analysis.
• A good abstract should provide specific research findings.
• It presents the principal conclusions of the systematic study.
• It should be concise, clear, and relevant to the field of study.
• A well-designed abstract should be unifying and coherent.
• It is easy to grasp and free of technical jargon.
• It is written impartially and objectively.

What are the various sections of an ideal Abstract?

By now, you must have gained some concrete idea of the essential elements that your abstract needs to convey . Accordingly, the information is broken down into six key sections of the abstract, which include:

An Introduction or Background

Research methodology, objectives and goals, limitations.

Let's go over them in detail.

The introduction, also known as background, is the most concise part of your abstract. Ideally, it comprises a couple of sentences. Some researchers only write one sentence to introduce their abstract. The idea behind this is to guide readers through the key factors that led to your study.

It's understandable that this information might seem difficult to explain in a couple of sentences. For example, think about the following two questions like the background of your study:

• What is currently available about the subject with respect to the paper being discussed?
• What isn't understood about this issue? (This is the subject of your research)

While writing the abstract’s introduction, make sure that it is not lengthy. Because if it crosses the word limit, it may eat up the words meant to be used for providing other key information.

Research methodology is where you describe the theories and techniques you used in your research. It is recommended that you describe what you have done and the method you used to get your thorough investigation results. Certainly, it is the second-longest paragraph in the abstract.

In the research methodology section, it is essential to mention the kind of research you conducted; for instance, qualitative research or quantitative research (this will guide your research methodology too) . If you've conducted quantitative research, your abstract should contain information like the sample size, data collection method, sampling techniques, and duration of the study. Likewise, your abstract should reflect observational data, opinions, questionnaires (especially the non-numerical data) if you work on qualitative research.

The research objectives and goals speak about what you intend to accomplish with your research. The majority of research projects focus on the long-term effects of a project, and the goals focus on the immediate, short-term outcomes of the research. It is possible to summarise both in just multiple sentences.

In stating your objectives and goals, you give readers a picture of the scope of the study, its depth and the direction your research ultimately follows. Your readers can evaluate the results of your research against the goals and stated objectives to determine if you have achieved the goal of your research.

In the end, your readers are more attracted by the results you've obtained through your study. Therefore, you must take the time to explain each relevant result and explain how they impact your research. The results section exists as the longest in your abstract, and nothing should diminish its reach or quality.

One of the most important things you should adhere to is to spell out details and figures on the results of your research.

Instead of making a vague assertion such as, "We noticed that response rates varied greatly between respondents with high incomes and those with low incomes", Try these: "The response rate was higher for high-income respondents than those with lower incomes (59 30 percent vs. 30 percent in both cases; P<0.01)."

You're likely to encounter certain obstacles during your research. It could have been during data collection or even during conducting the sample . Whatever the issue, it's essential to inform your readers about them and their effects on the research.

Research limitations offer an opportunity to suggest further and deep research. If, for instance, you were forced to change for convenient sampling and snowball samples because of difficulties in reaching well-suited research participants, then you should mention this reason when you write your research abstract. In addition, a lack of prior studies on the subject could hinder your research.

Your conclusion should include the same number of sentences to wrap the abstract as the introduction. The majority of researchers offer an idea of the consequences of their research in this case.

Your conclusion should include three essential components:

• A significant take-home message.
• Corresponding important findings.
• The Interpretation.

Even though the conclusion of your abstract needs to be brief, it can have an enormous influence on the way that readers view your research. Therefore, make use of this section to reinforce the central message from your research. Be sure that your statements reflect the actual results and the methods you used to conduct your research.

Good Abstract Examples

Abstract example #1.

Children’s consumption behavior in response to food product placements in movies.

The abstract:

"Almost all research into the effects of brand placements on children has focused on the brand's attitudes or behavior intentions. Based on the significant differences between attitudes and behavioral intentions on one hand and actual behavior on the other hand, this study examines the impact of placements by brands on children's eating habits. Children aged 6-14 years old were shown an excerpt from the popular film Alvin and the Chipmunks and were shown places for the item Cheese Balls. Three different versions were developed with no placements, one with moderately frequent placements and the third with the highest frequency of placement. The results revealed that exposure to high-frequency places had a profound effect on snack consumption, however, there was no impact on consumer attitudes towards brands or products. The effects were not dependent on the age of the children. These findings are of major importance to researchers studying consumer behavior as well as nutrition experts as well as policy regulators."

Abstract Example #2

Social comparisons on social media: The impact of Facebook on young women’s body image concerns and mood. The abstract:

"The research conducted in this study investigated the effects of Facebook use on women's moods and body image if the effects are different from an internet-based fashion journal and if the appearance comparison tendencies moderate one or more of these effects. Participants who were female ( N = 112) were randomly allocated to spend 10 minutes exploring their Facebook account or a magazine's website or an appearance neutral control website prior to completing state assessments of body dissatisfaction, mood, and differences in appearance (weight-related and facial hair, face, and skin). Participants also completed a test of the tendency to compare appearances. The participants who used Facebook were reported to be more depressed than those who stayed on the control site. In addition, women who have the tendency to compare appearances reported more facial, hair and skin-related issues following Facebook exposure than when they were exposed to the control site. Due to its popularity it is imperative to conduct more research to understand the effect that Facebook affects the way people view themselves."

Abstract Example #3

The Relationship Between Cell Phone Use and Academic Performance in a Sample of U.S. College Students

"The cellphone is always present on campuses of colleges and is often utilised in situations in which learning takes place. The study examined the connection between the use of cell phones and the actual grades point average (GPA) after adjusting for predictors that are known to be a factor. In the end 536 students in the undergraduate program from 82 self-reported majors of an enormous, public institution were studied. Hierarchical analysis ( R 2 = .449) showed that use of mobile phones is significantly ( p < .001) and negative (b equal to -.164) connected to the actual college GPA, after taking into account factors such as demographics, self-efficacy in self-regulated learning, self-efficacy to improve academic performance, and the actual high school GPA that were all important predictors ( p < .05). Therefore, after adjusting for other known predictors increasing cell phone usage was associated with lower academic performance. While more research is required to determine the mechanisms behind these results, they suggest the need to educate teachers and students to the possible academic risks that are associated with high-frequency mobile phone usage."

Quick tips on writing a good abstract

There exists a common dilemma among early age researchers whether to write the abstract at first or last? However, it's recommended to compose your abstract when you've completed the research since you'll have all the information to give to your readers. You can, however, write a draft at the beginning of your research and add in any gaps later.

If you find abstract writing a herculean task, here are the few tips to help you with it:

1. Always develop a framework to support your abstract

Before writing, ensure you create a clear outline for your abstract. Divide it into sections and draw the primary and supporting elements in each one. You can include keywords and a few sentences that convey the essence of your message.

2. Review Other Abstracts

Abstracts are among the most frequently used research documents, and thousands of them were written in the past. Therefore, prior to writing yours, take a look at some examples from other abstracts. There are plenty of examples of abstracts for dissertations in the dissertation and thesis databases.

3. Avoid Jargon To the Maximum

When you write your abstract, focus on simplicity over formality. You should  write in simple language, and avoid excessive filler words or ambiguous sentences. Keep in mind that your abstract must be readable to those who aren't acquainted with your subject.

4. Focus on Your Research

It's a given fact that the abstract you write should be about your research and the findings you've made. It is not the right time to mention secondary and primary data sources unless it's absolutely required.

Conclusion: How to Structure an Interesting Abstract?

Abstracts are a short outline of your essay. However, it's among the most important, if not the most important. The process of writing an abstract is not straightforward. A few early-age researchers tend to begin by writing it, thinking they are doing it to "tease" the next step (the document itself). However, it is better to treat it as a spoiler.

The simple, concise style of the abstract lends itself to a well-written and well-investigated study. If your research paper doesn't provide definitive results, or the goal of your research is questioned, so will the abstract. Thus, only write your abstract after witnessing your findings and put your findings in the context of a larger scenario.

The process of writing an abstract can be daunting, but with these guidelines, you will succeed. The most efficient method of writing an excellent abstract is to centre the primary points of your abstract, including the research question and goals methods, as well as key results.

Interested in learning more about dedicated research solutions? Go to the SciSpace product page to find out how our suite of products can help you simplify your research workflows so you can focus on advancing science.

The best-in-class solution is equipped with features such as literature search and discovery, profile management, research writing and formatting, and so much more.

But before you go,

You might also like.

Consensus GPT vs. SciSpace GPT: Choose the Best GPT for Research

Literature Review and Theoretical Framework: Understanding the Differences

Types of Essays in Academic Writing - Quick Guide (2024)

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Thesis / dissertation formatting manual (2024).

• Filing Fees and Student Status
• Submission Process Overview
• Electronic Thesis Submission
• Paper Thesis Submission
• Formatting Overview
• Fonts/Typeface
• Pagination, Margins, Spacing
• Paper Thesis Formatting
• Preliminary Pages Overview
• Copyright Page
• Dedication Page
• Table of Contents
• List of Figures (etc.)
• Acknowledgements
• Text and References Overview
• Figures and Illustrations
• Using Your Own Previously Published Materials
• Using Copyrighted Materials by Another Author
• Open Access and Embargoes
• Copyright and Creative Commons
• Ordering Print (Bound) Copies
• Tutorials and Assistance
• FAQ This link opens in a new window
• Includes the title, your name, the degree name, the university name and year, and your committee chair's name; all of the above must be consistent with your title page .
• Text is double-spaced.
• Use indent or flush left at the beginning of paragraphs, depending on the style manual you are following. Include a short statement of the problem you studied; a brief exposition of the methods and procedures employed in gathering the data; and a summary of your findings. No graphs, charts, or tables may be included.

Abstract Example

Here is an example of an Abstract page from the Dissertation template. Note the formatting of the heading information, which should match the information on your title page.

• << Previous: Vita
• Next: III. Text and Reference (Body) Pages >>
• Last Updated: May 31, 2024 9:34 AM
• URL: https://guides.lib.uci.edu/gradmanual

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

GSLC Dissertation Support Guide

• GSLC Dissertation Support Guide Home
• Digital Accessibility [alt text] Requirements from OhioLINK
• Digital Dissertations [PDF] + Supplemental Files / Font Requirements
• Essential Resources: Dissertation Handbook & Style Choices & Authoritative Manuals
• Including Multimedia Inside Your Dissertation Document- Tips From WEX This link opens in a new window
• WEX FAQs and other editing tips / checklists This link opens in a new window
• Our Archives : Where your Dissertation will "live"
• Dissertation Titles and Online Discovery

Abstract Requirements

Selecting keywords & subject headings.

• Multimedia /Data Set Inclusion - Supplemental Files
• Author Introduction - Multimedia Option
• Your Name and Your ORCID Number
• Copyright and Permissions
• Permission Request Checklist
• Final Submission - Link & Important Instructions
• Post - Submission
• Curating your Scholarly Identity This link opens in a new window
• Last Steps Workshop This link opens in a new window

The Dissertation Abstract

The abstract is your dissertation's calling card to the world.  The abstract is usually your first connection with every potential reader.   It also is a key feature in discovery of your dissertation through search engines.

Abstract Requirements and Checklist :

• Number of paragraphs  : Abstract should be ONE PARAGRAPH  [no returns]
• CC License Option: If you have chosen a Creative Commons License , this must specified in the abstract mentioning the type of license and linking back the the CC License page.
• how many supplemental files
• type of file
• whether or not they are also accessible within the PDF.  
• T his includes the author video abstract
• Length:  Abstracts no longer have length requirements in UMI/Proquest, but the print version of the database will cut off at 350 words MAXIMUM.   APA Style calls for 150-250 words, which is most reasonable.    The shorter, the better.
• Final Sentence :  To enhance discovery every abstract must carry this sentence at the end

  This dissertation is available in open access at AURA: Antioch University Repository and Archive, https://aura.antioch.edu/  and OhioLINK ETD Center, https://etd.ohiolink.edu/

Keywords are also essential to your dissertation being discovered online.

Keyword Guidelines:

• Place the keywords a few lines below the Abstract in your dissertation
• Your Keyword field is limited to 350  characters
• The Keywords in the Final Submission Form must match the Keywords in the Dissertation

Selecting Keyword :

Consider:   Which words would someone interested in my dissertation use? 

• ​ Language/ Jargon  used in your academic field? e,g, community of practice, best self
• Synonyms and Related Terms:  e.g. non-profit, not-for-profit, third sector / eating disorders,  anorexia, bulimia
• Alternate Spellings :  e.g. organisation, organization
• Methodology : e.g. grounded theory, qualitative, etc.
• Population:   e.g.  teachers, executives, African Americans, college students, grandparents
• Venue:   e.g.  workplace, corporations, elementary schools

Test your Keywords in Google and Google Scholar to see if they yield the items similar to your dissertation.

Subject Headings

On the Final Submission Form you will also be able to select Subject Headings for the Ohiolink ETD Center Archive;

• These subject headings DO NOT go into your dissertation
• This is a "Controlled Vocabulary" List.    You cannot change or add to the list.  There is no Subject Heading for LEADERSHIP. So add 'leadership' in your keyword list.
• Choose the most appropriate subject headings for your dissertation.  

Attached below is the current list from which you will choose.

• << Previous: Dissertation Titles and Online Discovery
• Next: Multimedia /Data Set Inclusion - Supplemental Files >>
• Last Updated: Jun 24, 2024 7:05 AM
• URL: https://libguides-phd.antioch.edu/AUETDCENTRAL

• EXPLORE Random Article

How to Write a Dissertation Abstract

Last Updated: March 6, 2020 References

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 23,161 times.

An abstract is a small summary of a larger paper. A dissertation is a long research paper with an original argument that you must write to graduate with a Master’s degree or doctorate. An abstract helps give your reader a map of your paper before he or she reads it. It also helps researchers to know if your paper will be helpful to them before they expend time reading it. Therefore, you should try to write as clear an abstract as possible, in simple and concise language.

Including the Necessary Information

• Start with your main thesis at the top.
• Next, read each section of your paper. As you read, write a one-sentence summary of each major chapter or section. Keep them in order on your paper. Regardless of your discipline, take time to point out the key theorists in the discipline you’ll be exploring in your paper.
• Include a summary of your conclusions, as well.
• If you’re writing an abstract for a scientific dissertation, it’s not necessary to include all of your literature review; however, you might include a sentence on how your paper fits into the larger academic discussion.

• Discuss how your research fits into the larger academic discussion.
• Talk about your methodology.
• Include your conclusions.
• Take time to discuss how it could lead to further research.

• Include any major works you’re analyzing. In other words, provide a short discussion of the source material, whether it’s the diaries of a famous historical figure for a history dissertation, a work of literature, a piece of music, or a great work of art.
• Discuss the major theories you’re applying to make your argument.
• Cover your main argument.
• Talk about your conclusions.

• Include any methodology you used to conduct research.
• Provide an overview of any studies you conducted, including participants and the purpose of the study.
• Discuss major theories that you are using for analyzing your work, as well as how your research fits into the larger discussion. Remember to keep it brief.
• Don’t forget to discuss your conclusions, as well as how your research could lead to further research.

• Include major theories you are using to analyze your research.
• Talk about your research methods, especially if you are collecting data.
• Provide specifics if you are looking at a particular company or analyzing a particular model.
• Discuss your overall conclusions.

Writing Your Abstract

• The name of the article you have written.
• Publication information, if there is any.

• Remember, you’re just trying to give your reader an overview of your dissertation, not every detail.

• You should also include the sentence about your conclusion.

• Remember, you are not just summarizing your individual thoughts in your abstract, you are recreating the argument you make in your paper in a shortened form.

• For instance, if you’re an archaeologist, you need to reference your primary materials.
• If you’re a librarian, you should talk about the methods you’ve used to collect your research.
• If you’re a psychologist, talk about the way you conducted your study.

• Only include information that is in the paper; do not bring new ideas into the abstract.

• The way you implement your research in science includes methodology (how you carried out your experiment), but in a humanities paper, you’ll likely be talking about the theories you applied in your research (such as applying Foucault’s theories to a book like Wuthering Heights).

Expert Q&A

• If you wrote a scientific, sociological, or psychological dissertation (or any other type of dissertation requiring field research), be sure to include information on your methodology. Thanks Helpful 0 Not Helpful 0
• If you’re writing an abstract on a literature paper, be sure to include the major works you’re reviewing. Thanks Helpful 0 Not Helpful 0
• You can use some technical language if it is a technical paper. Thanks Helpful 0 Not Helpful 0

You Might Also Like

• ↑ http://www.sciencebuddies.org/science-fair-projects/project_abstract.shtml
• ↑ http://writingcenter.unc.edu/handouts/abstracts/
• ↑ http://libguides.usc.edu/content.php?pid=83009&sid=621164
• ↑ http://librarybissell.act.edu/content.php?pid=136789&sid=1171531
• ↑ http://users.ece.cmu.edu/~koopman/essays/abstract.html
• ↑ https://owl.english.purdue.edu/owl/resource/656/01/

About this article

To write a dissertation abstract, start with a condensed version of your thesis that's no more than 1 sentence long. Then, include sentences about the methodology you used for your research and any major points or theories you analyzed. You should also include a sentence about the conclusions you drew based on your research. In general, try to keep your dissertation abstract between 100 and 200 words. To learn how to use an outline of your dissertation to write your abstract, keep reading! Did this summary help you? Yes No

Did this article help you?

• About wikiHow
• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

Want to Get your Dissertation Accepted?

Discover how we've helped doctoral students complete their dissertations and advance their academic careers!

Join 200+ Graduated Students

Get Your Dissertation Accepted On Your Next Submission

Get customized coaching for:.

• Crafting your proposal,
• Collecting and analyzing your data, or
• Preparing your defense.

Trapped in dissertation revisions?

How to write a dissertation abstract, published by steve tippins on may 25, 2020 may 25, 2020.

Last Updated on: 3rd June 2022, 04:27 am

The abstract is where you “sell” your dissertation. In over 95% of the cases, the first thing people see will be your dissertation’s abstract. If others (such as potential employers or fellow researchers) are going to be looking at your dissertation, you have to get their interest in the abstract. 

How do you get people’s interest? Think about what you wanted to know when you were searching, and that’s what needs to be in the abstract (in addition to anything that your school requires). 

Normally dissertation abstracts are a page or less. You’ll want to include the problem you were looking at, the questions you wanted to answer, and the methodology you used. Also include what you found and what it means (the implications). For a more in-depth explanation of what to include, see the sample outline below.

Advice for Writing a Dissertation Abstract

Every word is important in a dissertation abstract. Because the space you have is so limited, you want to make sure that every word and phrase helps the reader understand what they’re going to gain when they read the entire document. On the other hand, you don’t want to put everything in the abstract because you want them to read the actual paper.

Avoid the temptation to make it more than a page long. The truth is, people aren’t going to read a multiple-page abstract, which means they won’t read your dissertation. Don’t think of it as condensing 100+ pages of material down into one page. Rather, think of it as giving an introduction to what is contained in the pages of your dissertation.

Some schools have a rubric to follow. If they do have one, follow it to the letter. This will save you time and help you please your committee more easily. There’s also usually a good reason behind the requirements they set out, so it will improve the quality of your abstract overall.

While it takes a certain artfulness to be concise, the abstract should be a relatively easy section to write. Basically, you just have to tell people what you did. You don’t need to report any new information or do anything you haven’t already done while writing your dissertation.

Dissertation Abstract Sample Outline

Traditionally, abstracts are less than a page in length, are not indented, and contain no citations. While different universities may have slightly different requirements, most want to see some variation of the following:

• Introduce the study topic and articulate the research problem.
• State the purpose of the study
• State the research method 
• Concisely describe the overall research design, methods, and data analysis procedures.
• Identify the participants.
• Present key results 
• Outline conclusions and recommendations

What Comes After Writing Your Dissertation Abstract?

Writing your dissertation abstract means you’ve completed your study. Congratulations! As you move through the final phases of getting your degree and into your new career path, you may need support navigating today’s competitive job market. 

Academic jobs are more competitive than ever, and starting your own business is best done with the guidance of someone who’s done it before. Take a look at my academic career coaching services and book a free 30-minute consultation .

If you’re still working on your dissertation, I also offer dissertation coaching and dissertation editing services.

Steve Tippins

Steve Tippins, PhD, has thrived in academia for over thirty years. He continues to love teaching in addition to coaching recent PhD graduates as well as students writing their dissertations. Learn more about his dissertation coaching and career coaching services. Book a Free Consultation with Steve Tippins

Related Posts

Dissertation

Dissertation memes.

Sometimes you can’t dissertate anymore and you just need to meme. Don’t worry, I’ve got you. Here are some of my favorite dissertation memes that I’ve seen lately. My Favorite Dissertation Memes For when you Read more…

Surviving Post Dissertation Stress Disorder

The process of earning a doctorate can be long and stressful – and for some people, it can even be traumatic. This may be hard for those who haven’t been through a doctoral program to Read more…

PhD by Publication

PhD by publication, also known as “PhD by portfolio” or “PhD by published works,” is a relatively new route to completing your dissertation requirements for your doctoral degree. In the traditional dissertation route, you have Read more…

How to Write an Abstract for Your Thesis or Dissertation What is an Abstract? The abstract is an important component of your thesis. Presented at the beginning of the thesis, it is likely the first substantive description of your work read by an external examiner. You should view it as an opportunity to set accurate expectations. The abstract is a summary of the whole thesis. It presents all the major elements of your work in a highly condensed form. An abstract often functions, together with the thesis title, as a stand-alone text. Abstracts appear, absent the full text of the thesis, in bibliographic indexes such as PsycInfo. They may also be presented in announcements of the thesis examination. Most readers who encounter your abstract in a bibliographic database or receive an email announcing your research presentation will never retrieve the full text or attend the presentation. An abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there is insufficient time and space for the full text. Size and Structure Currently, the maximum sizes for abstracts submitted to Canada's National Archive are 150 words (Masters thesis) and 350 words (Doctoral dissertation). To preserve visual coherence, you may wish to limit the abstract for your doctoral dissertation to one double-spaced page, about 280 words. The structure of the abstract should mirror the structure of the whole thesis, and should represent all its major elements. For example, if your thesis has five chapters (introduction, literature review, methodology, results, conclusion), there should be one or more sentences assigned to summarize each chapter. Clearly Specify Your Research Questions As in the thesis itself, your research questions are critical in ensuring that the abstract is coherent and logically structured. They form the skeleton to which other elements adhere. They should be presented near the beginning of the abstract. There is only room for one to three questions. If there are more than three major research questions in your thesis, you should consider restructuring them by reducing some to subsidiary status. Don't Forget the Results The most common error in abstracts is failure to present results. The primary function of your thesis (and by extension your abstract) is not to tell readers what you did, it is to tell them what you discovered. Other information, such as the account of your research methods, is needed mainly to back the claims you make about your results. Approximately the last half of the abstract should be dedicated to summarizing and interpreting your results. Updated 2008.09.11 © John C. Nesbit

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

What Is a Dissertation Abstract?

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

Purpose of a Dissertation or Thesis Abstract

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

What Makes a Good Abstract for a Dissertation?

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.

How Long Should a Dissertation Abstract Be?

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation Abstract Structure

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

Things to Consider Before Writing a Dissertation Abstract

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.

Write an Abstract for a Dissertation Last

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Carefully Read Requirements

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Choose the Right Type of Dissertation Abstracts

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

• Informative
• Descriptive

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

How to Write an Abstract for a Dissertation or Thesis?

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

1. Identify the Purpose of Your Study

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

2. Discuss Methodology

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

3. Describe the Key Results

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

4. Summarize an Abstract for a Dissertation

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

How to Format an Abstract in Dissertation

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

Keywords in a Dissertation Abstract

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

Thesis and Dissertation Abstract Examples

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Extra Tips on Writing a Dissertation Abstract

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

Bottom Line on How to Write a Dissertation or Thesis Abstract

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

What is a dissertation abstract and how do I write one for my PhD?

Feb 12, 2019

There are a lot of posts that talk about how to write an abstract. Most say that you should write your abstract to impress your examiner.

We say that you need to flip things upside down: sure, your examiner will read it and want to see that you’ve written it well, but you should actually have your next boss in mind when you write it.

When you apply for your first academic job, the abstract may be the only part of your thesis that your new boss will read. They may not have the time or energy to read the whole thesis, so the abstract plays a crucial role. You should write it as if you academic career depends on it.

In this guide we talk about how to write an outstanding abstract that will (hopefully) land you a job.

If you haven’t already, make sure you download our PhD Writing Template , which you can use in conjunction with this guide to supercharge your PhD.

What is an abstract?

  This is fairly straightforward stuff, but let us be clear so we are all on the same page.

An abstract is a short summary at the beginning of the PhD that sums up the research, summarises the separate sections of the thesis and outlines the contribution.

It is typically used by those wishing to get a broad understanding of a piece of research prior to reading the entire thesis.

When you apply for your first academic job, the hiring manager will take a look through applicants’ abstracts (as well as your CV and covering letter) to create a shortlist. If you are lucky enough to do well at an interview, your potential new boss will take another look through it before deciding whether to offer you the job.

Why don’t they read the whole thing? Apart from the fact that they’re way too busy to read 200+ pages, a well written abstract actually contains all they need to know. It is a way of letting them see what your research is about, what contribution it makes, what your understanding of the field is and how or whether you will fit into the department.

So, you need to write it well.

But, don’t underestimate how hard it is to write a PhD thesis abstract. You have to condense hundred of pages and years of work into a few hundred words (exactly how many will depend on your university, so double check with them before you start writing).

How do I write a good PhD abstract?

Some blog posts use keywords to summarise the content (this one does, scroll down to see them). The abstract is similar. It’s an extended set of keywords to summarise a complex piece of research.

Above all, your PhD abstract should answer the question: ‘so what’ ? In other words, what is the contribution of your thesis to the field?

If you’ve been using our PhD writing template you’ll know that, to do this, your abstract should address six questions:

• What is the reason for writing the thesis?
• What are the current approaches and gaps in the literature?
• What are your research question(s) and aims?
• Which methodology have you used?
• What are the main findings?
• What are the main conclusions and implications?

One thing that should be obvious is that you can’t write your abstract until the study itself has been written. It’ll typically be the last thing you write (alongside the acknowledgements).

But how can I write a great one?

  The tricky thing about writing a great PhD abstract is that you haven’t got much space to answer the six questions above. There are a few things to consider though that will help to elevate your writing and make your abstract as efficient as possible:

• Give a good first impression by writing in short clear sentences
• Don’t repeat the title in the abstract
• Don’t cite references
• Use keywords from the document
• Respect the word limit
• Don’t be vague – the abstract should be a self contained summary of the research, so don’t introduce ambiguous words or complex terms
• Focus on just four or five essential points, concepts, or findings. Don’t, for example, try to explain your entire theoretical framework
• Edit it carefully. Make sure every word is relevant (you haven’t got room for wasted words) and that each sentence has maximum impact
• Avoid lengthy background information
• Don’t mention anything that isn’t discussed in the thesis
• Avoid overstatements
• Don’t spin your findings, contribution or significance to make your research sound grander or more influential that it actually is

Examples of a good and bad abstract

We can see that the bad abstract fails to answer the six questions posed above. It reads more like a PhD proposal, rather than a summary of a piece of research.

Specifically:

• It doesn’t discuss the reason why the thesis was written
• It doesn’t outline the gaps in the literature
• It doesn’t outline the research questions or aims
• It doesn’t discuss the methods
• It doesn’t discuss the findings
• It doesn’t discuss the conclusions and implications of the research.

It is also too short, lacks adequate keywords and introduces unnecessary detail. The abbreviations and references only serve to confuse the reader and the claim that the thesis will ‘develop a new theory of climate change’ is both vague and over-ambitious. The reader will see through this.

The good abstract though does a much better job at answering the six questions and summarising the research.

• The reason why the thesis was written is stated: ‘We do so to better enable policy makers and academics to understand the nuances of multi-level climate governance’ and….’it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’
• The gap is clearly defined: ‘The theory has neglected to account for the role of local governments.’
• The research question are laid out: ‘We ask to what extent and in what ways local governments in the UK’…
• The methods are hinted at: ‘Using a case study…’
• The findings are summarised: ‘We show that local governments are both implementers and interpreters of policy. We also show that they make innovative contributions to and influence the direction of national policy.’
• The conclusions and implications are clear: ‘The significance of this study is that it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’

This abstract is of a much better length, and it fully summarises what the thesis is about. We can see that if someone (i.e. your hiring manager) were to read just this abstract, they’d understand what your thesis is about and the contribution that it makes.

Your PhD thesis. All on one page. 

Use our free PhD structure template to quickly visualise every element of your thesis. 

I can’t summarise my thesis, what do I do?

  We suggest you fill out our PhD Writing Template . We’ve designed it so that you can visualise your PhD on one page and easily see the main components. It’s really easy to use. It asks you a few questions related to each section of your thesis. As you answer them, you develop a synopsis. You can use that synopsis to inform your abstract. If you haven’t downloaded it, you can find it here.

  Like everything related to writing, it takes practice before you get great at writing abstracts. Follow our tips and you’ll have a head start over others.

Remember, you’re not writing your abstract for anyone other than your hiring manager. Make sure it showcases the best of your research and shows your skills as both a researcher and a writer.

If you’re struggling, send us your abstract by email and we’ll have give you free advice on how to improve it.

Hello, Doctor…

Sounds good, doesn’t it?  Be able to call yourself Doctor sooner with our five-star rated How to Write A PhD email-course. Learn everything your supervisor should have taught you about planning and completing a PhD.

Now half price. Join hundreds of other students and become a better thesis writer, or your money back. 

Share this:

Hello! I am a first year PhD student and I am interested in your Thesis writing course. However, I don’t have Paypal, thus I would like to know if there is an alternative way for you to get paid. I hope so, because I have been “following” you and I think the course can be really useful for me 🙂 Hope to hear from you soon. Best wishes, Belén Merelas

Thanks for the comment – I have sent you an email.

Hello! I am a Master’s student and I have applied for a PhD position. The professors have asked me to write a short abstract-like text, based on a brief sentence they will send me, related to the project study. How am I supposed to write a text like that when I don’t have the whole paper, the methods, results etc? Thank you in advance!

Hi Maria. I’m afraid that without knowing more about your topic or subject I am unable to give you advice on this. Sorry I can’t help in the way you may have hoped.

Thank u so much… your tips have really helped me to broaden my scope on the idea of how to write an abstract for my Ph.D. course. This is so thoughtful of you… The article is very informative and helpful…Thanks again!

I’m so pleased. Thanks for your lovely words. They’re music to my ears.

Very insightful Thanks

Glad you think so. Good luck with the writing.

Thank you so much Doc

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Search The PhD Knowledge Base

Most popular articles from the phd knowlege base.

The PhD Knowledge Base Categories

• Your PhD and Covid
• Mastering your theory and literature review chapters
• How to structure and write every chapter of the PhD
• How to stay motivated and productive
• Techniques to improve your writing and fluency
• Advice on maintaining good mental health
• Resources designed for non-native English speakers
• PhD Writing Template
• Explore our back-catalogue of motivational advice

Writing Tips & Tools

• APA Resources
• Formatting Tables & Figures
• Heading Levels
• In-Text Citations
• Paraphrases & Quotations
• Reference List
• Setting Up an APA Paper
• Step 1: Prewrite
• Step 2: Outlining/Planning
• Step 3: First Draft
• Step 4: Revision
• Step 5: Editing/Proofreading
• Active vs. Passive Voice
• Comma Usage
• Parallel Structure
• Subject-Verb Agreement
• Academic Writing Genres & Common Assignments
• Defining & Avoiding Plagiarism
• Introduction vs. Abstract
• Knowing When to Cite
• Paraphrasing & Quoting Sources
• Utilizing Turnitin
• Primary vs. Secondary Sources
• Scholarly vs. Popular Sources
• Adding & Formatting Page Numbers
• Basic Tips for Microsoft Word
• Creating a Table of Contents & List of Tables/Figures
• Page & Section Breaks
• The Styles Pane
• Using Track Changes & Comments
• Abstracts (Saybrook Handbook)
• Appendices (Saybrook Handbook)
• Dissertation Finalization This link opens in a new window
• Front Matter
• Resources for Writing a Dissertation or Thesis
• Saybrook Handbook of Format & Style for Dissertations, Theses, Projects, & Capstones This link opens in a new window
• Get Writing Help This link opens in a new window

Our Top Resources

• Writing Coach Appointments
• Saybrook Handbook of Format & Style
• Sample APA Student Paper
• Student Paper Template
• Dissertation Template
• Editing Checklist
• Revision Checklist

This page details the formatting and requirements for abstracts that must follow the guidelines presented in the  Saybrook Handbook of Format​ & Style​ ​. These guidelines​ apply to dissertations, but they may also apply to master's projects and theses. For standard student papers, check our webpage  Introduction vs. Abstract​ . 

Basic Formatting

Here are the basic formatting requirements for abstracts. For a visual representation, please refer to the  Dissertation Template .​​

• Paginate beginning with page ii and number subsequent pages sequentially.
• Double space all lines of the abstract, except for lines including the title of the work.
• Include the word Abstract centered at the top of the page.
• 2 double-spaced lines below the word Abstract, the title of the work is written centered and in all caps.
• 1 double-spaced line below the title, write the author's name
• 1 double-spaced line below the author's name, write Saybrook University.
• 2 double-spaced lines below the title, begin writing the text.
• 350 words for dissertations (extended to 400 for mixed methods)
• 150 words for theses
• Include citations for citable statements and information.
• Embed key words in the text of the abstract. Do not list them separately at the end.

Content Outline

​​Empirical studies should contain four paragraphs using the outline presented below. Non-empirical studies should follow this format where possible and modify the format with the consent of your committee.

• Situate the research project in the subject domain.
• Convey the purpose, focus, and problem area of the study.
• Provide the research question(s) for the study.
• Discuss the literature (major links to related research, or its absence).
• Describe the method.
• Explain the rationale for selecting the method.
• List key demographic characteristics of research participants or other data sources.
• Include key terms regarding the nature of the data, sampling, research design, instrumentation, and data collection.
• Present the chief findings directly relevant to the research purpose and question.
• Include terminology to indicate the form of data analysis procedure used.
• Include supplemental findings considered important for cross-referencing.
• Communicate the meaning, significance, contribution, and implications of the research.
• Provide suggestions for further study.

Note that, for dissertations, paragraphs 1 & 2 can be written in the during the proposal phase while paragraphs 3 & 4 should be written prior to the final oral defense.

Abstract Checklist

This Abstract Review Checklist is provided on page 18 of the  Saybrook​ Handbook of Format & Style​ . For dissertations, this checklist must be complete and approved by a Saybrook editor before submission to the Registrar's Office for publication.

• PHD=350 (Mixed-Methods=400)
• ​Is it double-spaced?
• ​Is it in Times New Roman or similar serif font?
• ​Is it 12-point?
• Are paragraphs indented?
• Is the heading spaced correctly?
• Is the title capitalized?
• ​Is the purpose, problem, or research question clearly stated?
• Are key concepts explained?
• Are the major links to existing research identified?
• Is the method(s) and rationale for its selection provided?
• Is the data source identified?
• Is the nature of the data identified?
• Is the method of data analysis identified?
• ​Are the results & conclusions clearly stated?
• Is the significance & contribution of the study clearly stated?
• Are reference citations used for citable statements and information?
• Is there a correct use of past and present tense?
• Is it coherent, concise, & specific?
• Does it report rather than evaluate the essential elements of the study?
• Are key terms embedded in the text, not listed separately?
• << Previous: Writing a Dissertation or MA Thesis/Project
• Next: Appendices (Saybrook Handbook) >>
• Last Updated: Jun 20, 2024 1:31 PM
• URL: https://tcsedsystem.libguides.com/Writing-Resources

How to structure your PhD thesis

Organising your PhD thesis in a logical order is one of the crucial stages of your writing process. Here is a list of the individual components to include

Shama Prasada Kabekkodu

• More on this topic

Created in partnership with

You may also like

Popular resources

.css-1txxx8u{overflow:hidden;max-height:81px;text-indent:0px;} The secrets to success as a provost

Using non verbal cues to build rapport with students, emotionally challenging research and researcher well-being, augmenting the doctoral thesis in preparation for a viva, how hard can it be testing ai detection tools.

The task of writing a PhD thesis is top of mind for many aspiring scholars. After all, completing one is no small task. And while these pieces of writing often share a standard format, this can differ slightly based on the requirements of your institution or subject. So what elements make up a PhD thesis?

A doctoral thesis usually contains:

• A title page
• Declarations from the candidate and supervisor
• A certificate from the candidate and supervisor
• A plagiarism report
• Acknowledgements 
• A table of contents
• Abbreviations 
• An abstract

Chapters typically cover:

• A general introduction 
• Literature review
• Analysis of the gap in research with aims and objectives
• Materials and methods
• Summary and conclusion
• References or bibliography. 

You should also include a list of papers you have published and any relevant achievements at the end. 

An explanation of each of the components of a PhD dissertation 

Title page: a PhD thesis starts with a title page that contains the complete title of the research work, the submitting university, names of the candidate and supervisor, affiliation and month and year of submission.

Abstract: this serves as a concise synopsis of the dissertation, covering the research context, purpose of the study or research questions, methodology, findings and conclusions. This section is usually one to two pages in length. 

Table of contents: this page lists the thesis content and respective page numbers.

General introduction and literature review: this component is usually 20 to 40 pages long. It presents the readers with the primary material and discusses relevant published data. It provides an overview of pertinent literature related to the thesis such as texts that critically assess the existing literature to identify the gap in research and explain the need behind the study. 

Aims and objectives: this section of the thesis is typically one to two pages long and describes the aims and objectives of the study. Structure them as three to four bullet points describing specific points that you will investigate. Approach this by thinking about what readers should understand by the end of the thesis. Ensure you:

• Give a clear explanation of the purpose and goals of your study 
• Outline each aim concisely
• Explain how you will measure your objectives
• Ensure there is a clear connection between each aim
• Use verbs such as investigate, evaluate, explore, analyse and demonstrate.

Materials and methods: this section briefly explains how you have conducted the study and should include all the materials you used and procedures you implemented. For example, if your research involves working with chemicals, list the chemicals and instruments used, along with their catalogue numbers and manufacturers’ names. This section should also explicitly explain the methodology you used, step-by-step. Use the past tense while writing this section and do not describe any results or findings of the study yet.

Results: this section is sometimes called the “findings report” or “the experimental findings” (referring to data collection and analysis). Write the results concisely and in the past tense. Include text, figure and table infographics created with tools such as Microsoft PowerPoint, Adobe Illustrator and BioRender to visualise your data . 

Discussion: this is a chance to discuss the results and compare the findings of your study with the initial hypothesis and existing knowledge. Focus on discussing interpretations, implications, limitations and recommendations here.

• Resources on academic writing for higher education staff 
• Tips for writing a PhD dissertation: FAQs answered
• How to tackle the PhD dissertation

Summary and conclusion: this section should be shorter than the discussion and summarise your key findings. The summary and conclusion should be brief and engaging, allowing the reader to easily understand the major findings of the research work. Provide clear answers to the research questions, generate new knowledge and clarify the need for the study. 

Future perspective: this section of the thesis (which is often combined with a summary or conclusion) talks about the study's limitations, if any, and indicates the directions for future studies based on your findings. 

References or bibliography: the last section should include the list of articles, websites and other resources cited in the thesis.

Always remember that, depending on the department, university or field of study, you might have to follow specific guidelines on how to organise your PhD thesis. Ensure you consult your supervisor or academic department if you have any doubts.

Shama Prasada Kabekkodu is a professor and head of cell and molecular biology at Manipal School of Life Sciences, Manipal Academy of Higher Education, India.

If you would like advice and insight from academics and university staff delivered direct to your inbox each week, sign up for the Campus newsletter .

The secrets to success as a provost

Emotions and learning: what role do emotions play in how and why students learn, the podcast: bringing an outsider’s eye to primary sources, a diy guide to starting your own journal, formative, summative or diagnostic assessment a guide, harnessing the power of data to drive student success.

Register for free

and unlock a host of features on the THE site